Lin-Pack Lin-Pack belts are mainly used as feeder belts on box folders and labelling and creasing machines accelerator belts in tin plate processing and on packaging and glueing machines folder belts on heavy-duty folders in the heavy carton and corrugated cardboard industry conveyor belts with a high friction coefficient Overview of brochures

• good grip
• a high friction coefficient
• high resistance to abrasion

	Antistatic	Total thickness approx. mm (non ground) from/ to)*	Total thickness approx. mm (ground) from/ to)¹	FW-Value approx. N/mm width	SD-Value approx. N/mm width	dmin ³ approx. mm
RT 6 - L light red	·	.	3-8	6	.	30/65
R 6 - L light red	·	.	3-8	6	.	30/65
R 10/2 - L light red	·	.	4-8	10	.	40/65
R 10/3 - L light red	·		8-15	10		65/120
UU 20 U - Llight red	·	..	4-7	²	..	30/60
UU 60 U - L light red	·	.	8-12	-²	.	30/100

Folder and carrier belts

	Antistatic	Total thickness approx. mm (non ground)' from/ to)*	Total thickness approx. mm (ground) from/ to)¹	FW-Value approx. N/mm width	SD-Value approx. N/mm width	dmin ³ approx. mm
T1 - L light red	·	3.5 - 7*	.	.	2	40/60
T2 - L light red	·	5.0 - 12.5*	.	.	12	100
T3 - L light red	·	5.0 - 12.5*	.	.	8	100

Hardness of top face approx. 38 - 40 Shore A
Working temperatures tolerated: +10 - + 70 °C

*	Non-ground material is available in the following thicknesses: T1 - L = 3.5/4.5/6/7 mm T2 - L = 5/6.5/8.5/9.5/10.5/12.5 mm T3 - L = 5/6.5/8.5/9.5/10.5/12.5 mm
¹	For thicknesses within the stated range, specifications to one tenth of 1 mm can be obtained
²	Dependent on thickness of coating. Elongation at fitting: 6 % (UU 20 U) and 4 % (UU 60 U)
³	The smallest acceptable pulley (or roller) diameters depend on belt thickness and were established at normal ambient temperatures. Lower temperatures or very low relative humidity necessitate larger diameters.

• open roll material
• prepared material to be made endless with mechanical fasteners
• finished belts spliced to size